Re: Nuts, washers and lock washers for Tyco circuit breakers

Bruce Hughes

Hi Torger

Thank you very much.
I have bought a few things from McMaster-Carr.
My large fire extinguisher for the hangar is
from Grainger. I will check them.

I still have to go to Digi-key.


----- Original Message -----
From: Torger Totusek [canard-aviators] <>
Sent: Tue, 23 Jul 2019 01:21:41 -0400 (EDT)
Subject: Re: [c-a] Nuts, washers and lock washers for Tyco circuit breakers

Check McMaster Carr or Grainger. They have a pretty good supply of hardware that your typical hardware store will not have. Search on “lock washers” and you will be amazed!

Torger T
On Jul 22, 2019, at 5:37 PM, Dave Froble [canard-aviators] <> wrote:

On 7/22/2019 8:31 PM, Bruce Hughes
[canard-aviators] wrote:

Thanks, John.

The trouble with local suppliers
(we have Tacoma Screw on the
way to the airport) is that they
have washers that are too thick
and no nuts anywhere close to
the size and thread.


Can you be rather specific about what you need? You'll need to figure
out SAE vs metric. Quantities are important.

I'm not making any promises, but, I do have access to things such as you
wrote about. I'll try to get you some quotes.

It's possible I may have some stuff in stock, and could send you samples
to try.

David Froble Tel: 724-529-0450
Dave Froble Enterprises, Inc. E-Mail:
DFE Ultralights, Inc.
170 Grimplin Road
Vanderbilt, PA 15486

Posted by: Dave Froble <>


Yahoo Groups Links

Posted by: Torger Totusek <>


Yahoo Groups Links

Join to automatically receive all group messages.