Re: COZY: Raw Epoxy Fill for Elevators and Ailerons


It's been my experience that paint does not fill pin holes with any success. I would fill with raw epoxy and squeegee good.

Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: 'Andrew Anunson' via COZY Builders Mailing List <cozy_builders@...>
Date: 02/01/2020 1:28 PM (GMT-06:00)
To: COZY Builders Mailing List <cozy_builders@...>, Canard Aviators <>
Subject: COZY: Raw Epoxy Fill for Elevators and Ailerons

I have a few small pinholes in the micro fill on the ailerons and elevators (see attached photo).  On the rest of the plane, I've used raw epoxy fill for the pinholes.  Do we use the raw epoxy technique on the ailerons and elevators, or will this make them out of balance?  Perhaps these pinholes are small enough to be hidden by paint....

Andrew Anunson
Cozy MKIV #1273
Chapter 25
Pound, VA

Join to automatically receive all group messages.