Re: 2 blade wood prop


Tom Smith
 

Terry, you are correct. Just waiting for someone to bring that up.


Tom Smith  A&P/IA
Long-EZ N12TS
Cell-707-592-0869
KVCB
KJ6PZN


-----Original Message-----
From: Terry Schubert <jschuber@...>
To: canard-aviators@canardzone.groups.io
Sent: Sat, May 30, 2020 7:12 am
Subject: Re: [c-a] 2 blade wood prop

 Is there any issue when running a non certified prop on the certified airframe?  It is my understanding that FAA airframe type certificates list what props are OK to use on specific airframes. 
  
Terry Schubert
Central States Association Newsletter Editor Emeritus

---------- Original Message ----------
From: "Ross Burk" <apogee.design@...>
To: canard-aviators@canardzone.groups.io
Subject: Re: [c-a] 2 blade wood prop
Date: Sat, 30 May 2020 06:41:03 -0600

Greg, We have the old Propeller shop from Bruce Tift, and still make an occasional prop, and also have the ability to CNC carve a new one.  I don't pursue making props commercially anymore, but I would be happy to speak with your friend and see what might be possible.
Ross
 
On Fri, May 29, 2020 at 8:57 PM skovbjerg <skovbjerg@...> wrote:
Without knowing if Dr. Watson at E16, San Martin, CA makes propellers anymore, it is worth a try. He is a certified Shop and specialized in antiques. Otherwise, Catto, Sensenich 
Jay Skovbjerg

On May 29, 2020, at 17:27, Greg Norman <gnorm76@...> wrote:

I have a buddy very disappointed in the performance of his new wood prop for his Franklin powered Stinson. I mentioned there are a lot of canards with wood props and I'd ask the group for a good source.
Who shall he inquire for a good wood prop for his Stinson?
 
Greg Norman
 
 
 
 
--
Thank You!
Ross Burk
307-277-4642 cell

Join canard-aviators@canardzone.groups.io to automatically receive all group messages.