Re: Final thoughts from the Peel Ply side of the force
|
Tom Mann <tmann@...>
J D out at Infinity advised me to use the peel ply
method and don’t remove it until you are ready to bond to it. I’ve been doing
that since day one.
One thing I do is pull up a corner and mark it
with a red sharpie so I don’t forget that it’s still there.
The second best thing I learned (via Wayne Hicks)
was the sandblasting technique of surface prep. (See
link)
Believe it or not, this gives the area a uniform
surface to bond to, not just the peaks but the valleys too.
I also eliminates damage to the fibers that
ordinarily would come in contact with a sanding block.
T Mann |
|
|