Also, you are riveting through some glass too and it does not have an edge where the aluminum stops. Ron

Ed Andrews wrote: be sure to have the proper edge distance between the center of the rivet and the edge of the piece. This is a very important part. Minimum acceptable edge distance is 2 1/2 D.

Andrew, be sure to have the proper edge distance between the center of therivet and the edge of the piece. This is a very important part. Minimum acceptable edge distance is 2 1/2 D. Ed Longeze.

Hey guys, after fairing in three LongEZ's I wouldn't use anything but West System (plastic bubble) micro. I've used the normal white (glass bubble) micro, Superfill (a little heavier but fewer

I am looking for one room for the Rough River Flyin. Please contact me if you will be cancelling your reservation. Jim Rodrian Defiant N403R

Im assuming you mean the ENTIRE interior ... but you will need to use micro everywhere ( that shows anyway) that you used tapes on. Otherwise you will see every splice and tape seam after

FYI: FAA Issues TFR For Bahamian Airspace - AVweb FAA Issues TFR For Bahamian Airspace - AVweb The FAA has banned unauthorized U.S. aircraft from entering Bahamian airspace to clear the airspace for

Paul Comte wrote: Thank you for the heads up on the sale. I am gathering the finishing materials now. Have a lead for micro....... @$43 per 28lb bag. For a LongEz I am guessing three bags is

Following the hurricane, I reached out to a place I’ve stayed before several times to see what help they needed. John Chamberlain has some great cottages overlooking the beach by Staniel Cay Yacht

Thank you for the heads up on the sale. I am gathering the finishing materials now. Have a lead for micro from https://www.expresscomposites.com/hollow-glass-spheres-lightweight-filler @$43 per

CG Products (Cozy Girrrls) sell the complete assembly as part "Rudder Over-Travel Spring Assembly". When you consider making your own, you need to buy music wire in large quantities and then figure

Wicks Aircraft stocks that part... "SPRING-1887" for $9.04 per piece. Did you check with them? Andrew Anunson

Anyone have a couple of 1887 springs they can part with? (The ones for the rudder cables for hidden belhorns). Marl Sent from my Atari 2600

I left out of KFXE north of Miami two days ago. There were several Pilatus, twins and Cessna Caravans gearing up to go help at 4am with free ground support (rental cars, meals, hotels, fuel) for

David is right. Just showing up and spending some money on interesting services will help the people who live there get back to normal (as can be expected). My impression is many of the locals at Cat

On my Cozy, I used BSPQ43 (19 per aileron) and AD45-H (5 per aileron... these go through torque tube A10). Andrew Anunson Sent from a generic phonograph

Does anyone have a part number for the rivets used to attach the aileron hinges to the aileron? Diameter grip length? Thanks for any help Joe Berki Limo EZ

He made me great hoses, was pleasant to deal with and reasonable. My email program, MS Outlook, has been screwed up, I think it sent that before I finished typing, LOL Del

West Marine sells the West 105/206 system epoxies that some of us use for finishing, and with their free shipping (orders of $49 or more) they are the least expensive supplier that I could find.

Do the Bash if possible support the economy and bring down any supplies that might be needed. Kind of an airlift. Get as many canards and any other aircraft and organize a huge airlift and vacation at