When I started my current project "Nexus" I made myself two kits. I will sell the second kit to the right buyer for $1,500. The kit consist of fuselage top and bottom with nose. Fuel/baggage strake

Custom Aircraft Parts will probably sell'em. They built the exhaust system for my 360. Bob

While on this topic... I have one slip flange that leaks. I keep thinking its the flange gasket leaking but it's the slip fitting. Does anyone have any ideas on how to seal it? Thanks Tim Andres Sent

Hi All, Can anyone point me to a source for the exhaust manifold slip joints for the Lyc 0-360/0-320? (no luck on the ACS website) By slip joints I mean the parts that bolt to the cylinders which

The key is not to remove and replace the silicone baffles, the key is to have it fold out away from the top of engine so the high pressure area will hold it tight to the cowl. If it folds in toward

Well after what seems a long time and after many good suggestions and the changes that were made 64EZ not have very acceptable CHT readings. Flew for 1.4 hrs this morning and never seen the temps get

I fly Southwest regularly, and the last time, three weeks ago, the flight attendants weren't that entertaining, but the pilot was as we approached Rochester, kidding us about having left Phoenix

Chrissi, If memory serves (and it doesn't as well as it used to) the Central States "picnic" at the Explorers Post was/is on Wednesday evenings, but it seems to have fizzled out. You might check with

My alert was a false alarm. It looks like the link is ok and Jack actually did send the note despite the lack of his usual signature. Sorry for any inconvenience. I meant well. Izzy

Where can I get vari-eze build plans? Thanks Sent from Windows Mail Just received the above request email. From scmills2006@... So, If any of you 3000+ very ez builders, flyers or just plans

I’m good for Wednesday too. Phillip Johnson Cozy MKIV RG Powered by Subaru IO-200 (SN 0300) http://www.canardaviation.com/PhillipJohnson

Canardians, We've just read the announcement the Burt will be returning to Oshkosh... yay! Tuesday the 21st will be a celebration of all things Burt at Oshkosh provided the US Air

Do not click this phishing attempt link below. Sneaky bastards! Izzy 603-410-7277 (iPhone)

This is Funny. You will enjoy it :-)

Chrissi wrote: Deanie and I will be arriving Wednesday morning, creek don't rise and Cthulhu willing. First time in many years we'd be able to make it, so it works for us. -- Marc J. Zeitlin

Wednesday works for me, put me down Burrall

Canardians, We've just read the announcement the Burt will be returning to Oshkosh... yay! Tuesday the 21st will be a celebration of all things Burt at Oshkosh provided the US Air Force is not

My definition of 1/16 was in inches. I will have the minimum glass to glass bond at the trailing edge and may extend the upper canard skins at the trailing edge to allow enough extra material to be

Chris wrote: What's the definition of "exact"? 1/16"? 1/32"? 0.001"? 1 micron? One issue with the plans is that there are few tolerances, so we're left to our own device. As long as you have the 0.3"