Hello from Oshkosh! The site for the dinner is secured once more. For those that were there last year it is still on North Doolittle down past the Fly-In Theater, this time it is just 250 feet further

Thanks Tim, I suppose one could calculate the approximate weight difference Burt surely someone knows. Since I posted the question to the forum I decided to email Lycoming to see what they say. I will

Ill guess Don, its a 2” bore IIRC, about 8” or so deep. So maybe 3 lbs? Assuming its not also counter weighted and some of them have lightening holes in the flange, so its hard to say. There is

I cut out my own panel lettering on a vinyl cutter. If you go much below 1/4" tall letters, it gets pretty tough. Ron

Here’s an example of what I was able to cut with the cricut. The lightning was made by using vinyl as a stencil. I’ve done lettering as well. A lot of those vinyl shops use a tool similar to a

one last thought on leaking brakes. I had the problem for a while, discovered I had the puck in backwards. The o-ring was too close to the disc when fully extended by the fluid. The puck looked to

Vinyl letters that small? Greg Norman

If you have a Cricut cutting machine, you can also cut your own vinyl out as well. I made decals for my car of a canard profile with one. David Kissick

Anyone know the weight difference between a solid 0-360 crankshaft and a hollow one? After doing a search on the web, all I could find are references stating only a small difference, but no actual

I use DOT 5 also for the same reason, fire in a Cozy III. Keith

Hi, Just buy yourself a Brother’s label maker and make your own. That is what I do. You can make new labels as you change things. Torger T Long-EZ 606TT FUL

If you planning a complete panel design (instead of one or two switches) , I found it easiest to design the lettering/placards you want to add to the various locations, (add color if you wish), take

Thanks for bringing this up. I have owned a P-touch for years and never knew such tapes - now on order - were an option. Now, to get some crayon remover 😀. Bruce Smith LEZ

I have the T-touch as well. Very pleased w/ its output. It has a lot of capabilities so be careful to NOT lose the instruction sheet. There are all types of tapes available. I have

Correction.....P-touch, TZe tape, such as white on clear #TZe-135 and black on clear #TZe-131. --Jose -- skyeyecorp@...

Ive been playing with Brother T-touch labels. Black on clear and also white on clear. I think they work very nicely. Some of the off brand, generic, T-touch labels are reported to not stick well so I

Hi, David, just go to Office Max, they have MANY different styles of tape for the machine. Sincerely, Mike Scovel SE Michigan VariEze Mbl (313) 608-7202 Email ezdriver@...

Do it yourself! Not hard to do, not that expensive and doesn’t look bad. Mike

Well, I don't know about "Brother-T Touch", but, I found "Brother P-Touch" and for $30 on Amazon. I spent $30 for two sets of 6 words last week. Sure would have bought the label maker, and most