Hi Marc I got my manual from the hangar. I do NOT have a Garmin, Dynon, GRT, Sandia, Trig, or other expensive stuff. So I had to buy the SkyFyx to have a WAAS GPS. IF you have the same equipment, go

Thank you, Chris. Bruce

Thanks to all, The old adage works: When all else fails, read the instructions. See the attached file for SkyFyx.. It looks like, from the diagram on the left, that I needed to connect to

Just installed it in my Velo. Crazy simple. Download the manuals (2) from Uavionix. Each box has a red power and black ground and 1 white wire interconnects between the 2 boxes. You need the manuals

Bruce, I have 2.5 inch diameter AN-210-2A Chris Seats Long Ez in progress On Wednesday, July 24, 2019, 01:13:35 PM

Can anyone tell me the AN/MS # of the upper pulleys, or at least the diameter (I failed to write it down while at the hangar)? I need to order a slightly smaller replacement. Note to buyers of

Marc I have the same unit and am installing it today. The paperwork is in the hanger. I will send more information when I get home around 4 PDT. I do know that there are 3 wires from the Skyxxx.

Marcus, there's a good article about the uAvionix in the latest issue of Flying mag by Peter Garrison. From his description all you need are the wires that go to your nav light, A hot wire and a

I just bought a uAvionix Echo/SkyFyx ADS-B, and I have no idea what the wires coming out of the multipin connector on the rear are. I am without a clue how to connect my new purchase. The

Thanks.. are you at OSH?

Ryszard, I have one. Lemme know! Dale For Contact info - See Website http://www.long-ez.com =====================>

Hi Torger Thank you very much. I have bought a few things from McMaster-Carr. My large fire extinguisher for the hangar is from Grainger. I will check them. I still have to go to

Hi Marc, All, That's absolutely fine, pleased to help. Where you are I would term a comfortable economy cruise to give a reasonable range in your harsh Arizona environment and elevations. The great

Check McMaster Carr or Grainger. They have a pretty good supply of hardware that your typical hardware store will not have. Search on “lock washers” and you will be amazed! Torger T

Hi Rich Yes I will try them. Thanks. Bruce

Hi David I know that the male threaded parts are .464 inch for the toggle and pop-out C.B. and .370 for the push-pull type. The toggle C.B. use the same nuts and washers as ordinary toggle

Bruce you might want to try B&C They have various nuts in chrome and black Rich

I am up here at Osh and have my handheld com that you can use. Andrew Anunson Sent from a generic phonograph

Anyone at OSH have one of the single Terra Comm radios, the push button type? One of the RAFE LongEZs has one and a digit is stuck. It’s one of the aircraft flying on Burt Rutan day and it needs a

\ Bruce, Can you be rather specific about what you need? You'll need to figure out SAE vs metric. Quantities are important. I'm not making any promises, but, I do have access to things such