Vertically oriented tape labels
|
All, THROTTLE MIXTURE ALT AIR Tom Staggs Long-EZ N13YV “Invictus” Based at Paine Field, Everett, WA (KPAE) (425) 531-1776 |
|
|
|
Phil Kriley
Any print shop can do this, and probably Staples or Office Max as well. Phil Kriley On Aug 2, 2022, at 8:41 PM, Tom Staggs <tjstaggs13@...> wrote:
|
|
|
|
Steve Campbell
Hi Tom
toggle quoted message
Show quoted text
I believe I can do it. I’ll check what size I can do tomorrow to confirm. Send me your address and I will mail them to you Steve Campbell scampbell@... On Aug 2, 2022, at 8:58 PM, Phil Kriley via groups.io <greilich@...> wrote:
|
|
|
|
Steve Rothert
I went to a trophy/awards shop and had them engrave me a plaque with vertical letters, as shown in the picture.
Steve |
|
|
|
Phil Kriley
Nice! Phil Kriley On Aug 5, 2022, at 2:49 PM, Steve Rothert via groups.io <SWROTHERT@...> wrote:
|
|
|
|
Made some, on the way.  -Christian -- www.BrilliantDesignOnline.com Solidworks Design & CNC Plasma Cutting -a division of- www.AlpineWorldwide.com "We build ideas.." On Tue, Aug 2, 2022 at 6:41 PM Tom Staggs <tjstaggs13@...> wrote:
|
|
|
|
Terry Schubert
Hi Christian,
How did you do that?
It would make a great Canard Aviation Magazine article
Terry Schubert Central States Association Newsletter Editor Emeritus Please note: message attached From: "Christian von Delius" <alpineglobalprivate@...> To: canard-aviators@canardzone.groups.io Subject: Re: [c-a] Vertically oriented tape labels Date: Fri, 5 Aug 2022 13:09:51 -0600 |
|
|
|
Mike Tooze
Alternatively you could print your decals on what I would call label slips/paper. - Peel-off with adhesive backing. I use them for printing the labels on my home made jams. Oh, and on my Eze. Print in Word with your font/back colour of choice. A coat of varnish and you're done. Mike T
|
|
|
|
Torger Totusek
As I recall, my p-touch labeler will do vertical text. It is a stick on label, not a fancy engraved metal but works well for me. You can get various color combinations of tapes. You have to set the labeler to do vertical, type in what you want and it will print it vertically. I need to double check though.
toggle quoted message
Show quoted text
T2 On Aug 6, 2022, at 8:48 AM, Mike Tooze via groups.io <miketooze@...> wrote:
|
|
|
|
Rick Hall
It will, quite easy if you use their 'app' on a Winders machine. If
they still offer the app :-/
toggle quoted message
Show quoted text
I labeled my panel with white letters on clear tape, still looks nice after 6-8 years. Can tell it's tape though, but the pilot/owner gets used to it ;) Rick On 8/7/2022 4:26 PM, Torger Totusek via
groups.io wrote:
As I recall, my p-touch labeler will do vertical text. It is a stick on label, not a fancy engraved metal but works well for me. You can get various color combinations of tapes. You have to set the labeler to do vertical, type in what you want and it will print it vertically. I need to double check though. |
|
|
|
Terry- I have a K-Sun LabelShop 2010PC which is a stand-alone USB label 'dot matrix' printer. The software runs on a PC and has many options, including importing text and graphics from external programs. There are no buttons on the printer which takes 'standard' Epson cartridges, which you can get 'cheaply' & easily from AliExpress or Amazon. Unfortunately, K-Sun is out of business, and is semi-acquired by Epson. That model is no longer produced, but if you can find one, I highly recommend it. As far as an article goes, it is pretty specific and pretty simple software specific, so it would not be much of an instructional. In this case, to simplify, I adjusted the font size, and used the letter-enter-letter-enter...method to space it portrait, and the end descriptions in normal but small font. Also, the Epson compatible cartridges are available in handy shrink tube various sizes and cable flag wrap arounds, for labeling your wiring runs: super handy. -Christian -- www.BrilliantDesignOnline.com Solidworks Design & CNC Plasma Cutting -a division of- www.AlpineWorldwide.com "We build ideas.." On Fri, Aug 5, 2022 at 6:38 PM Terry Schubert <jschuber@...> wrote:
|
|
|
|
Terry Schubert
HI Christian,
Thank you for the label making directions. I appreciate your time and help.
Terry Schubert
Central States Association Newsletter Editor Emeritus Please note: message attached From: "Christian von Delius" <alpineglobalprivate@...> To: canard-aviators@canardzone.groups.io Subject: Re: [c-a] Vertically oriented tape labels Date: Mon, 8 Aug 2022 13:19:26 -0600 Terry- I have a K-Sun LabelShop 2010PC which is a stand-alone USB label 'dot matrix' printer. The software runs on a PC and has many options, including importing text and graphics from external programs. There are no buttons on the printer which takes 'standard' Epson cartridges, which you can get 'cheaply' & easily from AliExpress or Amazon. Unfortunately, K-Sun is out of business, and is semi-acquired by Epson. That model is no longer produced, but if you can find one, I highly recommend it. As far as an article goes, it is pretty specific and pretty simple software specific, so it would not be much of an instructional. In this case, to simplify, I adjusted the font size, and used the letter-enter-letter-enter...method to space it portrait, and the end descriptions in normal but small font. Also, the Epson compatible cartridges are available in handy shrink tube various sizes and cable flag wrap arounds, for labeling your wiring runs: super handy. -Christian -- www.BrilliantDesignOnline.com Solidworks Design & CNC Plasma Cutting -a division of- www.AlpineWorldwide.com "We build ideas.." On Fri, Aug 5, 2022 at 6:38 PM Terry Schubert <jschuber@...> wrote:
|
|
|
|
Glenn Charles
Walmart sells
toggle quoted message
Show quoted text
Label makers that work very nicely for 20 -30 bucks ! You might consider those. Glenn On Saturday, August 13, 2022, 6:12 AM, Terry Schubert <jschuber@...> wrote:
|
|
|
