COZY: Re: [c-a] Dynon D10A screen replacement
|
Del Schier
Neil, You say that you installed a new one and it is dead. Was the old one dead? If the old one had a dark spot and the new one was completely dark perhaps you didn’t get the ribbon cables fully seated or they are damaged. Also check that you have > 12 V going to it. I had my D10 EFIS be dark and then flashing and it was a corroded fuse holder causing the problem. They are still on eBay LQ038Q5DR01 for sale | eBay Del Schier Cozy IV N197DL Cannon Creek Airpark 15FL
From: cozy_builders@... <cozy_builders@...> On Behalf Of Neil Clayton
Sent: Tuesday, January 17, 2023 4:11 PM To: canard-aviators@canardzone.groups.io; COZY Builders Mailing List <cozy_builders@...> Subject: COZY: Re: [c-a] Dynon D10A screen replacement
A while ago I bought a new Dynon display screen from Teamequip for about $30 total. I just got around to installing it and it’s dead. Now Teamequip doesn’t show it on their website and they’re not answering their phone or live “chat”.
I thought about sending the unit to Dynon for repair but they’ll charge hundreds.
Does any one have another source where I can buy a replacement screen?
Thanks Neil _____________________________________________________________
I think I found several sources, not just Teamequip.
Try searching Google for LQ038Q5DR01
I did and several sources came up. Neil
-- |
|
|
|
Neil Clayton
Thanks for the reference, Del.
toggle quoted message
Show quoted text
The old one (that I installed about 4 years ago) developed a blank spot in the center of the display that eventually made the screen unreadable. The problem is intermittent. I installed/un-installed/bench-tested it several times, but I couldn’t get it to stay on. Yes, 12v supply good. Hmmm…where’s the "fuse holder"? Inside the unit? Do you mean the breaker for the unit? I have an RMA number from Dynon but I know they’re gonna charge me $600 for the unit, plus labour fees, so I haven’t sent it off yet. I’ll get another on order (from China) but I’d like to try to find the problem with this one. Thanks Neil
|
|
|
|
Del Schier
Neil, My Cozy has Bussmann fuse holders for most of the circuits in the airplane. Just taking out the EFIS fuse and sticking it back in a few times fixed the black or blinking screen on the EFIS. I replaced the fuseholder to be safe. So low startup supply voltage will cause the D10 not to light up. I would take apart the D10 again and visually inspect all the connections that you had worked on replacing the display. Del
From: Neil Clayton <harvey4@...>
Sent: Wednesday, January 18, 2023 10:09 AM To: cozypilot@... Cc: canard-aviators@canardzone.groups.io; COZY Builders Mailing List <cozy_builders@...> Subject: Re: COZY: Re: [c-a] Dynon D10A screen replacement
Thanks for the reference, Del. The old one (that I installed about 4 years ago) developed a blank spot in the center of the display that eventually made the screen unreadable.
The problem is intermittent. I installed/un-installed/bench-tested it several times, but I couldn’t get it to stay on. Yes, 12v supply good. Hmmm…where’s the "fuse holder"? Inside the unit? Do you mean the breaker for the unit?
I have an RMA number from Dynon but I know they’re gonna charge me $600 for the unit, plus labour fees, so I haven’t sent it off yet.
I’ll get another on order (from China) but I’d like to try to find the problem with this one.
Thanks Neil
|
|
|