Dynon D10A screen replacement - Thanks
Neil Clayton
Thanks to everyone who responded for my request to source a new Dynon screen for my D10A (especially Del). I found one at Teamequip.com (915 603-5444). It’s described as on their website. It came in yesterday; $15, plus $21 shipping = $36, total vs Dynon’s $600!! I’ll fit it at the weekend and report how it works. Thanks to everyone! Neil |
|
Del Schier
Neil, Getting it out of the panel was the hard part. Take the face off gently and carefully, I think there were two Phillips flat heads. The key buttons and the keypad rubber will fall out. Take pictures with your phone but I think there will be no confusion putting it back together connecting the cables and putting it back in the case, that is, if you do it within a few days. DO NOT touch the back of the rubber key contacts with your fingers or the circuit board the conductive rubber buttons contact; also DO NOT try to clean the contacts. You will notice the old one looks different than the new one only because it doesn’t have the metal shield on it. Take off the shielding on the new one carefully, it should be obvious how to get it off. I don’t know what caused the big blotch in the middle of my screen but I looked like the surface of the screen had de-laminated, maybe from moisture or heat. Mine has been looking perfect since my replacement. Good luck, Del
From: canard-aviators@canardzone.groups.io <canard-aviators@canardzone.groups.io> On Behalf Of Neil Clayton
Sent: Tuesday, September 20, 2022 9:49 AM To: COZY Builders Mailing List <cozy_builders@...>; canard-aviators@canardzone.groups.io Subject: [c-a] Dynon D10A screen replacement - Thanks
Thanks to everyone who responded for my request to source a new Dynon screen for my D10A (especially Del).
I found one at Teamequip.com (915 603-5444).
It’s described as on their website.
It came in yesterday; $15, plus $21 shipping = $36, total vs Dynon’s $600!! I’ll fit it at the weekend and report how it works.
Thanks to everyone!
|
|
Del Schier
Neil and the group, I noticed Mouser and DigiKey both have that screen marked as discontinued! So if you have a D-10 EFIS or EMS it might be wise to get a spare while they are still floating around.
Del
From: canard-aviators@canardzone.groups.io <canard-aviators@canardzone.groups.io> On Behalf Of Neil Clayton
Sent: Tuesday, September 20, 2022 9:49 AM To: COZY Builders Mailing List <cozy_builders@...>; canard-aviators@canardzone.groups.io Subject: [c-a] Dynon D10A screen replacement - Thanks
Thanks to everyone who responded for my request to source a new Dynon screen for my D10A (especially Del).
I found one at Teamequip.com (915 603-5444).
It’s described as on their website.
It came in yesterday; $15, plus $21 shipping = $36, total vs Dynon’s $600!! I’ll fit it at the weekend and report how it works.
Thanks to everyone!
|
|
Dale Martin
Del & Neil, I am unable to find the same part? Must have been their last one! |
|
Neil Clayton
I think I found several sources, not just Teamequip.
toggle quoted message
Show quoted text
Try searching Google for LQ038Q5DR01 I did and several sources came up. Neil
|
|
Del Schier
If you aren’t in a rush I got my spare on eBay from China LCD screen display panel LQ038Q5DR01 For SHARP 3.8inch 320(RGB)×240 | eBay
Del
From: canard-aviators@canardzone.groups.io <canard-aviators@canardzone.groups.io> On Behalf Of Dale Martin
Sent: Thursday, September 22, 2022 3:16 PM To: canard-aviators@canardzone.groups.io Subject: Re: [c-a] Dynon D10A screen replacement - Thanks
Del & Neil,
I am unable to find the same part? Must have been their last one!
LQ038Q5DR01 LCD Screen Display Panel Module T147915
I did find them on Ebay ; https://www.ebay.com/p/672371932?iid=254622044863
Dale
On Thu, Sep 22, 2022 at 9:09 AM Del Schier <cozypilot@...> wrote:
|
|