I tried to get to http://www.eznoselift.com/ but the site seems to be down. I emailed Jack about it to see if he needs any help. In the meantime, if anyone can send me the schematic for his limit swit

A couple years ago I overhauled my exhaust system and replaced the exhaust flange fastening hardware. I had noticed during dis-assembly that I had a mix of nuts on the flanges. Some were badly corrode

The per-plans engine air filter/induction setup is said to be restrictive, robbing the engine of power producing air. (I'm referring to the firewall mounted air filter.) I've been playing with replaci

The October Canard Calendar is now available on the COBA website

Hi Del Are you using a Lycoming prop governor cover plate or a home made plate? When I converted my IO 360 A1A to a fixed pitch prop I made a cover plate from 1/8 inch thick 2024. It would leak after

Related to the RAFE discussion regarding emerging un-insurability issues and accident analysis, there was a brief mention of accident data. On Friday, the NTSB made some changes to their website and m

Belleville washers? Andrew Anunson

Hi all, Lycomings should be Leakcoming engines! 😊 I am always chasing leaks on my Cozy’s IO-360 C1E6 angle valve. I had a mess all over the engine and the cowls after flying up to Rough River and back

Folks: It's been a while since I posted the list of COZY's for sale (that I know of), so here you go. If you know that something on this list is incorrect, please let me know so that I can fix it. Tha

Any stories, photos, number results of RR this year? Sorry I missed this year. Greg Norman N540GN

Jose Velez wrote: I use: which are not only Stainless Steel, but also small diameter 12-point, making them FAR easier to get a socket onto in the cramped region on the medial side of the exhaust pipes

Spell checkers /auto correction ;-( Correction, penultimate sentence:- ' ...if available, be included in your analyse.' To read '..... if available, be included in your analysis' Mike T ------ Origina

Folks: This is a new Service Bulletin From Lycoming. It only affects a few engines, and probably won't affect anyone on this list, but for record keeping purposes, you should list this along with all

Built like a cozy. Called a torsion box. Three-quarter inch plywood and then two by sixes with a ladder frame inside and then three-quarter inch plywood on the other side. The side shown is the plywoo

After much research I found; http://www.clearcoproducts.com/pdf/pure-silicone/NP-PSF%20Super%20Hi%20Viscosity%20Fluids%20(300k%20to%2020%20mil)%20.pdf Which is the spec of a “super high viscosity flui

“Balancer” is the wrong term for this unit. It is a “Dampener”. Its purpose is to dampen harmonic vibrations, not balance a rotating mass. -James Berkut/Race 13

Are there any canard builders/flyers in the Richmond VA area? Would you please contact me off line. Thanks, Nick Ugolini

I have an used Trio Avionics EZ Pilot (list $1120) for sale for $300. I do not have the servo which can be purchased separately from Trio. If you have a NavAid servo, this wing leveler will work with

I've been using the same W24 EMR-C for the last 3-4 years (~150hrs) and other than a little cleaning at condition inspections, they have given me reliable engine operation. I probably don't need to ch

Hi All, I’m looking for a Landoll harmonic balancer - has anyone got one or know of one for sale? Bill Allen CZ4 G-BYLZ LE160 N99BA--