Stumbled on this today. Nice retrospective: https://www.cnet.com/pictures/an-up-close-look-at-americas-forgotten-supersonic-bomber/30/ Ken

Folks: So apparently Garmin has forgotten (for the short term) how to manufacture and/or ship GSA28 autopilot servos - they've been on back order for a couple of months, and aren't scheduled for shipm

I'm looking at a couple of strakes that are distressed. The builder tried to contour the Divinycell (or whatever was around in 1982) but overheated it a bit and the foam sagged. The difference in hieg

Folks: For those of you who are not on the Kanab distribution list: ---------- Forwarded message --------- From: Ryan Goodman <ryan.m.goodman@...> Hello Canardians and previous Rutan Kanab Fly-in atte

Saro Marcarian wrote: Yes. Yes. The X30 SEEMS to not continue to expand forever - I've used it on a number of planes, including my own, and don't see any continuous expansion. -- Marc J. Zeitlin marc_

Folks: If you have a Garmin G5 in your panel, please note that Garmin has issued a "Mandatory" Service Bulletin against certain serial #'s due to battery discharge issues. The list of serial #'s affec

All, April’s calendar has been uploaded to http://canardowners.com in the documents section. It should be available to paid members immediately and a bit later after the admins flag the file as public

Hi Greg, and all He ground ran it yesterday and shut down after 16 minutes of ground running at 500 deg. I told him not to ground run it, especially with a new engine; which I think was good advice. H

Hi all, The other day I was helping a friend with a brand new EZ which he did not build; it only has 4 or 5 hrs. on it. It has a newly overhauled O-320 and it on his couple of flights with it was show

On Friday March 18th at the evening gathering via Zoom hosted by Russ I mentioned sourcing tungsten scrap from ebay I intended to use as ballast ($10/lb which is about 1/6th the cost of tungsten bars

---------- Forwarded message --------- From: Keith Spreuer <kspreuer@...> Date: Sat, Mar 19, 2022, 4:52 PM Subject: Re: COZY: Alternator Baffle Seal To: Todd Carrico <tcarrico.cozy@...> Tried BID infu

Nice plug Allen! Izzy (603)410-7277 ----- Forwarded Message ----- From: KITPLANES <no-reply@...> To: Israel Briggs <inbriggs@...> Sent: Sunday, March 6, 2022, 01:26:57 PM EST Subject: KITPLANES Homebu

Testing group emails. I may have a problem with MS Outlook, my emails to the group bounce back as spam or don’t get sent. I have three group emails but I think one of them is defunct. Are these all go

All, For those in the know, go to http://canardowners.com for the latest monthly calendar. Tom

Good evening! Please accept my apologies for the delay in releasing the March Episode of Canard Owners and Builder's "CanardsCast". We typically like to release them on the first of the month, but I a

I would like to find one of the Casale reduction gear boxes I built in the '90's for some of my builders. My records were lost to water damage. I sold one to Carroll Justice (deceased). Anyone know wh

Rutan Aircraft Flying Experience has received a VariViggen project located in Dillsburg, Pa. The owner is moving and the project needs to get relocated pretty quick. If anyone is near there and can he

Oil Analysis from Blackstone for my son's Aeronca Chief attached. Izzy (603)410-7277 ----- Forwarded Message ----- From: II Briggs <ivanibriggs@...> To: Dad <inbriggs@...> Sent: Friday, July 30, 2021,

Here's the Savvy Analysis for my Dad's RV. Savvy doesn't do oil analysis. Izzy (603)410-7277

Oil Analysis for N22AZ from "Lab One Inc." Personally, I prefer these guys report over Blackstone. Izzy (603)410-7277 ----- Forwarded Message ----- From: Damon Meyer <dmeyer4@...> To: Izzy Briggs <inb