I’d skip it. If you need it to land the your runway is too short or your speed is too hight. Go slower or go somewhere longer Izzy (603)410-7277

For those of us who have not kept up with the developments in 100LL replacements, Avweb has a new two-part series on the topic called "The Long, Twisted and Slightly Ridiculous Story of Avgas". You ca

When making the fuel cap retainers it is important that the chain be heavy duty ball chain. The reason is the ball chain is free to roll around when lowering the nose for parking. That is important fr

All, I have an original Brock quadrant, and the labeling has worn off over the decades. I am wondering if there is anyone out there who has access to a label printing machine that could print the foll

Hi all: I'm to the point of ordering my prop from Catto. My Cozy Mk IV will have a 180 hp O-360, eventually. I need you flyers to please give feedback on props - 2 or 3 blade? Nicole from Catto said:

I was told to use actual small chain, not beaded chain, when I bought a used VariEze. Fuel Cap Safety chains were among a few things that my mentor, a Long-EZ builder/pilot, said I needed before I had

Hi folks, I recently purchased a Defiant, and one of the things I noticed on the prebuy was a _lot_ of soot on the rear prop. We're talking absolutely _caked_, picture attached below. At first I chalk

H all: Next up is this new Velocity rudder pedal assy that I adapted for my Coxy Mk IV. When I bought Joe Person's great project, he had already installed Dennis Oelmann rudder pedals - so this set is

Hi all; I have a wooden stick grip (might be Brock) w/ coolie hat & PTT switch, steel insert, and set screw - free to a good home. No clew if the switches work and you pay shipping. It's from a Cozy,,

When I was looking into fuel systems and filtration I gathered the following info which might be of interest - if there’s anything to be added or edited, please let me know. One thing I couldn't find

All, Thanks to Dave Anderson’s photo of EZ Street at Oshkosh, you now have an August Calendar posted to the http://canardowners.com website. Thanks for sharing, Dave! Tom Carey

My wife backed out at the last minute so I have an extra set of wristbands for Tuesday and Wednesday. First response who is really going gets them. Steve Steve Campbell scampbell@...

Anyone have a functioning strong system they would like to part with? --Craig -- (_ |-------==(_)==--------| o/ | \o

Hello All, With oil filters becoming increasingly and difficult to obtain for our aircraft I was wondering if anyone knows of, or uses An automotive filter in their Lycoming engines specifically an o-

Just under 2 years ago I ordered 6 gallons of resin plus 12 quarts of the subject hardener. The resin arrived, the hardener did not. After waiting for a couple of weeks I called Aircraft Spruce and no

Does anyone know of anyone I could pay to make a carbon fiber canard/elevator for my Long Ez? Can anyone recommend someone in the Midwest who is skilled at balancing canards/elevators, who I could pay

Gary's Presentation: http://www.cozybuilders.org/Oshkosh_Presentations/2006_EpoxyDoDonts.pdf Page 14 - "Properly stored, epoxy hardeners are good for many years." "However, hardeners can have a limite

On a flight from Southern California, I stopped last night in Kanab, UT really low on fuel. But this was deliberate, because fuel is priced really cheap there. This morning I fueled up and the bill wa

Cozy Girrrls 2nd Annual Early Birds Jambalaya Jam (a CG / CSA / RAFE group event for Canard Enthusiasts ) ========================================================= If you are coming to Airventure 2021

Folks: Just wanted to put in a good word for Ray Allen Company, Inc. I have two G407 sticks in my COZY MKIV, with the hat switch and two pushbuttons on the top (as well as the PTT on the front). I lik