I received a direct email from an unknown sender today as a response to a post I made to this forum. It contained an attachment. I don’t trust it and am wondering if maybe sone of you got it too. If y

Has anyone ordered from them? I placed an order weeks ago, paid and have heard nothing! Sent msgs with no response.

Re. Uavionics Echo install.. Fwiw. The Echo installation instructions on the Uavionics website says the ground plane dimensions should be at least 8 in x 8 in...that's the SMALLEST!. see section 7.2 o

https://www.ebay.com/itm/333746402595?ssPageName=STRK%3AMEBIDX%3AIT&fromMakeTrack=true

https://flightaware.com/live/flight/N352TD/history/20201007/1811Z/KVLD Very short flight it appears. Craig -- (_ |-------==(_)==--------| o/ | \o

Main Landing Gear for Long Ez. $400 plus shipping. Stored inside, never mounted, not drilled. Bought this several years ago from a builder who stopped building. I think I remember he said it came from

Has anyone had to remove/reinstall one or more of the aluminum hard points that are embedded into the main wing of an Ez? If so, I would like to hear your suggestions on how to proceed and repair. My

Can anyone recommend a wiring diagram for dual batteries as I am using an auto engine? I started with Bob Nuckolls book but had to re think as I am shifting to a carb and simple ignition system instea

Folks: Thanks to Mike Beasley, the latest version of the CSA Newsletter Index is available at: http://cozybuilders.org/ref_info/ Happy searching. -- Marc J. Zeitlin marc_zeitlin@... http://www.cozybui

Izzy

https://www.ainonline.com/aviation-news/defense/2019-12-24/flying-augmented-skies-red-6 -- James W. Evans Jr. Airport Manager Tappahannock - Essex County Airport 1450 Aviation Rd. Tappahannock, VA 225

The October Canard Desktop Calendar is ready for download. As always: Thanks a lot for the many beautiful pictures I have received so far. I’m always looking for new pictures, if you have pictures to

Good Morning Everyone, I have a like new (and in the Trio Box) ProPilot Auto Pilot and both pitch and roll “Gold Standard” Servos for sale. I had purchased this for my Long EZ but that plane was lost

I have posted the code in a previous email for those who are interested. One of the issues results from taking code that others have created and I have adapted to the sensors in play, results in sever

So far about 30 airplanes have attended Rough River. I’ve heard from at least two that are still enroute but stuck somewhere for weather. It’s a nice day here, though probably about 2500 overcast. Som

I have an extra room at RR available for tonight and tomorrow of anyone needs one. Just call the front desk. Ryszard

Hi, I started a project a couple of years ago using Arduino mega board for an engine monitor. I required an engine monitor that could provide the information to support a rotary engine. The parameters

I am starting the teardown of a 235 for rebuild & have access to an Overhaul Manual dated 1974, about the vintage of the original. Other than checking for ADs etc. does anyone in the central TN area O

Attached is the code for my engine monitor which requires more work Joe Berki

I am not sure I understand your question. There are two "versions" of the G5, one for certified aircraft with an STC for installation. You do not want one of those for your Experimental Amateur-Built.