All, I uploaded a new February Calendar. The earlier upload was the wrong resolution. The new one is up there, now. Tom Carey

All The monthly canard calendar has been posted to the canardowners.com website in the documents section under Canard Calendar. Tom Carey

Hey everyone, I know it's a longshot, but I'm in need of a fuel flow transducer for an ancient VM1000 (TRANSDUCER P/N 3010032). This is the transducer for Fuel Injected engines. Ona a side note, is an

Folks: Well, I've bit the bullet and will be having my O-360-A2A engine rebuilt by Aerosport Power in Kamloops, BC. Same folks that built it in the first place in 1998. I'll be using an SDS EFI/EI sys

I was trying to get some 620-125-177 washers for my siver bullet propeller. Having said that, I 'm have a hard time finding them. Is there an alternate more in stock part I can look for. I know this i

FYI for those with a hankering for a big nav system...I'm selling my New GTN 750 xi, listed for almost $20K on Garmin's website for $15K on Barnstormers. If any canard owners want it, I'll drop it to

Just saw this: https://www.aopa.org/news-and-media/all-news/2022/november/22/faa-extending-aircraft-registration-period?utm A little less hassle for folks with flying airplanes. Ken

Folks: I previously posted parts for sale - some have been quickly scarfed up. Here's What's still available: Airflow Performance Fuel Injection system, including FM-200 Servo, turbo injectors/nozzles

Sent from Mail for Windows From: Marc J. Zeitlin Sent: Wednesday, June 22, 2022 8:10 AM To: Canard Aviators Subject: Re: [c-a] Operation limitations Todd Carrico wrote: A number of misconceptions here

Neil, You say that you installed a new one and it is dead. Was the old one dead? If the old one had a dark spot and the new one was completely dark perhaps you didn’t get the ribbon cables fully seate

A while ago I bought a new Dynon display screen from Teamequip for about $30 total. I just got around to installing it and it’s dead. Now Teamequip doesn’t show it on their website and they’re not ans

Folks: I have a brand new set of Varieze Wing Fittings, never used, in the foam wrappers. They are complete and ready to install after alodining. Obviouslyt great for someone building a VE, or for som

Folks: Eddie Eiland (not a mailing list member) is attempting to sell a flying COZY MKIV (N244CZ) that was built by Jonathan Farr and is now owned by non-pilot Garrett Womack (who apparently knows lit

Marc Zeitlin wrote: Canadians get first dibs. Like the goose? (goose=duck=canard?) Andrew Anunson

The attached picture is looking forward (down in the photo because the wing is held on its leading edge) on the right wing at the location of the inboard aileron hinge attachment. I have a straight ed

I’d clamp it between to straight, flat pieces of wood and apply heat, then let it cool completely. Repeat if needed. Phil Kriley

Hi all, I would advise that, if you are building, and haven’t done you landing light install, I wouldn’t do the plan’s flip down behind the nose gear. I am disappointed with my plans LED upgrade. Sinc

If anyone is interested I have sold my Long EZ project and I now have an engine to get rid of. It has been rebuilt by an A&P and is ready to go. If you are interested call or text. 319-310-1975 Al Wag

Having seen lots of chat on night flying. Position of lights, type of lights etc on recent threads, I thought it might be useful to post Mike Melvills’ post from CP65 Oct 1990. LANDING LIGHTS AND COCK

All, The January 2023 Canard Calendar is available on the http://canardowners.com web site. If you are not a member of COBA, you will have to wait a couple of days to set access to public. Tom