Andrew Anunson wrote: He is incorrect, and doesn't understand what a transponder is, or what an ADS-B transmitter/receiver is. No. Ignore him and don't use him - he doesn't know what he's talking abou

Andy, I have recently had nosewheel shimmy on landing and I think there are a couple of causes. I had cleaned and lubed and set the shimmy damper and after it got too loose causing the first two incid

I was up flying this past Sunday in my Cozy MKIV with buddy, we were at front seat weight of 390 and a CG of 99.3. Final landing for the day, did my GUMPS check and watched the electric nose gear exte

My name is Ryan and I am in San Diego, CA. Looking for a plane that is or has been flying. With or without engine. I do not want a project that needs structural repair. I can do cosmetic repair on fib

I've been calling some local airplane mechanics to schedule my transponder inspection required by 91.413. One them asked me "How many transponders do you have?" I have one transponder, a Garmin GTX32.

I've just been chatting to Chris Seats, I would like to point out that there are bearing shops in the US that can supply PTFE lined bearings 3/4" I.D. that are fine for the control tube support. There

Oops PTFE lined thin shell ally plain bearings. Apologies, Mike T

Builders, Great news for you builders that bought my gauges and have gotten sticky fingers epoxy on the bubble during some phase of assembling and installing them, which is not hard to do. Up 'till no

Folks: Thanks to Mike Beasley, the latest index of the COBA / CSA Newsletter is available here: http://cozybuilders.org/ref_info/ Happy searching. -- Marc J. Zeitlin marc_zeitlin@... http://www.cozybu

Way back, bulders recommended getting good quality vents for the instrument panel because some of the less expensive ones leaked air when they were closed. I picked up a pair of Wemac vents which are

Andrew Anunson wrote: Hmmm. Very strange. I have the larger version of those vents: and have never heard/seen that, and I've flown in other planes with both the large and small version of those and ha

All, Fyi, the March calendar has been uploaded to the Canard Owners website. Tom

Hi All, Some time back one of our group posted a link to a clip showing the start and sudden spread of a fire when the batteries of an electric bus went critical. If someone could please re-post that

We're planning a circuit from Columbia to Tahoe to Kennwick, Couer d'alane and back to Prescott

I'm in!

--------- Forwarded message --------- From: Tim Fisher <t.fisher13@...> Date: Sat, Feb 25, 2023 at 5:01 PM Subject: SAVE THE DATE Getting ready for the 20th event … if you have a good story to tell. P

Thanks to everyone for the great suggestions. No one seemed to think that cooling air was the major issue but it is the engine timing/mixture/oil. We will do this before the next test flight: Get the

Thanks for the help so far fixing my friend, Rick Cooler's EZ's P51 cooling problems. Yesterday I spent the day with his EZ yesterday and I have more info about his EZ. BTW I got Rick up to speed on j

I have an airpark neighbor that built a very nice Cozy III wit ho did a neat stick cover. I don’t have a picture but he put half a rubber ball, similar in size to a tennis ball, over the stick and the

Ok Gang, got a question! What are people using to cover the hole for the Control Stick AND how are you attaching the cover to both the Control Stick and the Arm Rest? Suggestions AND pictures are huge