toggle quoted messageShow quoted text
Ah, yes, I have the “Ken Clunis ice-resistant” pitot config on my Eze.
On May 6, 2020, at 12:28 PM, nosedragger48154 <ezdriver@...> wrote:
No Joe, I speaking of your Pitot Tube in your Vari.
Mbl (313) 608-7202
From: email@example.com <firstname.lastname@example.org> On Behalf Of Joe Person
Sent: Wednesday, May 6, 2020 3:21 PM
Subject: Re: [Canard Zone] LED Landing light?
No landing light in my Eze.
I would like to see the picture of landing light in the nose too!
On May 6, 2020 at 3:17 PM nosedragger48154 <ezdriver@...> wrote:
In the nose, it is exactly like Joe Person’s. In fact he is where I got the idea from in the first place. I’ll get a picture of it later this afternoon and sent it to you.
Where is your pitot tube?
Mike I have zero regrets with my Pitot/landing light install in my ez. Check it out under avionics chapter on my build log.
On May 6, 2020, at 12:48 PM, Keith Spreuer <kspreuer@...> wrote:
I agree, the nose is a very good location. No deployment mechanism, turn it on in any flight regime, no shadows, no vibration no heat.... I used a High beam/low beam so I get both taxi and landing angles. I turn them both on at once but that is easily changed. I did relocate the pitot to above and behind the nose a few inches but it works well. The calibration is reasonable and no pitot in the dirt when parking
On Wed, May 6, 2020 at 9:24 AM nosedragger48154 <ezdriver@...> wrote:
I personally would really like to see the process you went thru to put the lights in the nose, that is if you took pictures of the all the different steps. Also how you are forming the Plexiglass lens.
Mbl (313) 608-7202
Landing gear strut and brake light is great when you are in only landing configuration.
It, however eliminates one of the advantages of lights (both in day and night) and that is when close to a busy airport illuminated and possibly alternating lights are one more thing that might catch the eye of other pilots in the air.
I originally thought about wheel pants but dismissed that because of vibration (possibly not applicable to LEDs) but also increased heat in the pant via the brakes reducing life..
Pods, if you have them would be great.
I am putting them in the nose and am about to mold the plexi. We will see how that comes out.
In a message dated 5/6/2020 9:50:11 AM Central Standard Time, SWROTHERT@... writes:
I've seen some guys put a landing light in the speed brake and another installation on the nose gear strut.
I have often thought about installing landing lights in the nose of the wheel pants but worried about the life expectancy with just normal vibration.
If you have the wing pods installed, another thought would be to install the landing lights in the nose of the pods.
Colorado Springs, CO