toggle quoted messageShow quoted text
I placed my dipole in the backseat leg area, and used a Nickel based paint to create my ground plane. I don’t have the name of the paint handy but I can get pictures and send more data if you have interest it worked perfect.
On Jun 23, 2020, at 6:36 AM, Phillip Johnson <Cozy.cgple@...> wrote:
Delete my last message, you are only talking about ADSB IN not OUT.
On Jun 23, 2020, at 8:35 AM, Phillip Johnson via groups.io <Cozy.cgple@...> wrote:
Aren’t you concerned about transmitting high power so close to your head?
On Jun 23, 2020, at 8:18 AM, Steve Stearns <steve@...> wrote:
I made a wideband dipole out of brass tubing and mounted it on the back of the headrest (Longeze). I use it for both bands and it works fine. Sorry I don't have a better picture.
Boulder / Longmont CO
On Mon, Jun 22, 2020 at 10:39 AM Richard Sessions <rtsessions@...
I know there has been a lot of discussion on the ADSB-In antenna placements a few months back, but curious to see what people are getting good results with in
a Classic Cozy 3 now that there has been a little more time and likely more experience.
I know there was the slot antenna and others, but I am thinking a 13"ish square foil for the dipole under the left thigh support. I know it is a projection and subject to ridicule, but pretty simple and not a lot of changes / structure in the back seat area.
I am hooking up to a Dynon HDX system in a panel upgrade and it is about the last thing I have when my newly repaired ADAHRs gets back (static port failure....).
Feel free to contact me off line as I am sure most feel we have done this to death.
Richard Sessions, Cozy 3 N9455 (William Chorley builder if anyone has anything on it)
Houston's Ellington Field (KEFD) - Go RAFE!
rtsessions@..., 281-467-2432 (leave a message with all the spam....)