Does anyone have some extra 5/8” R45/H45 foam that they’d like to sell? I only need a few square feet and A/C Spruce doesn’t have any in stock. I have a couple holes in my Defiant fuselage that

Hello, Looking for some pictures of a throttle quadrant installation that is using the Kevin Walsh style throttle quadrant levers (boomerang shaped). A view with the push pull cables installed would

Hello. My sponsor, mr. Ron Jones, from ThunderBird Aviation Michigan, http://www.thunderbirdaviationmi.com/ wants to build me a full scale P-51D Mustang Replica airframe and he wants to donate it

I have 11 blocks of the original blue foam for sale that I used to build my Longez. contact me at 22118jm@...

I would move the wheel pants a little higher and make sure you have plenty of side clearance. When I changed to Goodyear tires, one of the screws that attaches the front part of the wheel to the rear

Wrong address 🤭 -- Bulent Aliev Enginegear ph +1 954.557.1019 fax +1 386.957.4473 Bulent@... www.enginegearonline.com

Sorry, I Don’t remember where I got it. It was long time ago. -- Bulent Aliev Enginegear ph +1 954.557.1019 fax +1 386.957.4473 Bulent@... www.enginegearonline.com

Installing a new set of wheel pants to my LongEz. In setting them up I currently have about 1" inside from top of tire and about 1.5" from bottom to floor. Is this about the right amount of spacing?

I just saw this on Craigslist. I'm out of town so can't look it over myself. https://boulder.craigslist.org/avo/d/erie-varieze-85-complete-with/7183127477.html Good Luck, Ion 0-320 Long EZ 1640 hrs.

Hello, I get all my Divinycell directly from Diab a few years ago. Regards

Hi Ralf, I don't know if it fits your needs, but I have 02each F500-035 3/4x24x48, H45, 3# DIVINYCELL P FOAM. The material is located in Portugal. Regards, Ricardo A sábado, 22/08/2020, 16:26, Ralf

Try boat building supply companies. They sell Divinicell. Only thing is that they will sell full sheets. -- Bulent Aliev Enginegear ph +1 954.557.1019 fax +1

Hello Long-EZ builders, it seems Aircraft Spruce no longer provides Divinycell H250 foam. Are there any alternative know distributers of Divinycell H250 in Europe? I tried to contact Diab directly,

Hi Charles, Of course, you are totally correct about reverse engineering. I just remember the transition to carbon fibre really allows racing to continue in a very safe manner to this day The glass

Hi Sam, I worked for Hercules Inc. as a composites manufacturing engineer when we built the first tubs. A lot of engineering went into the total design, and a lot of testing was done as the Aluminum

Hi all, I have followed Formula 1 since 1958 the last driver to die in a honeycomb aluminium structure was Gille Villeneuve in 1982. A very sad day for my sport. McClaren cars developed a carbon

Along that line of thought, I actually flew my defiant for a few years with cables in racing tradition, that prevented an engine from completely departing an aircraft making the balance impossible.

Here's what I have. It's 3/16" aluminum tubing welded to 3/16" plate and angle, weighs 6 pounds, all covered with exposed carbon to make it look pretty. There's four 1/4" bolts going through the

Interesting video. One might reflect that in such racing, it's not if an accident will happen, it's when. One might also hope that flying and EZs is a bit less risky. Regardless, it's still a

Howdy folks, This is a video on the formula 1 halo which has proven to be very safe. The entire tub and halo structure is autoclaved carbon fibre. From u tube