|
New/old VariEze takes to the sky 11 messages
Yesterday I did the second first flight on my VariEze. The first was in July 1981. I flew N118SJ for over 1400 hours including ten trips to Oshkosh from California and it was my ride through the 21 ye
Yesterday I did the second first flight on my VariEze. The first was in July 1981. I flew N118SJ for over 1400 hours including ten trips to Oshkosh from California and it was my ride through the 21 ye
|
By
Steve
·
|
|
Change Day VFR only op limitations, was LED lights
All this stuff about landing lights made me realize my Cozy is limited to day VFR only. Since I have landing, position, strobe and panel lighting how to I get the day VFR only changed to day or night
All this stuff about landing lights made me realize my Cozy is limited to day VFR only. Since I have landing, position, strobe and panel lighting how to I get the day VFR only changed to day or night
|
By
Del Schier
·
|
|
[Defiant Flyers] New/old VariEze takes to the sky
Steve- Oh so well done my friend. I truly get the 'builder itch' more than you can know. I've got a dozen projects in the wings but planes take priority! Since O$H 2020 is CNX, let's make plans to hav
Steve- Oh so well done my friend. I truly get the 'builder itch' more than you can know. I've got a dozen projects in the wings but planes take priority! Since O$H 2020 is CNX, let's make plans to hav
|
By
KEN4ZZ
·
|
|
[Defiant Flyers] New/old VariEze takes to the sky 2 messages
Congratulations Steve! Jim R
Congratulations Steve! Jim R
|
By
Jim Rodrian
·
|
|
LED Landing light? 36 messages
About five years ago I promised my EZ a landing light for Christmas. Well, I've got some time on my hands now, does anyone have suggestions? -I would prefer to minimize any composite work, so a bolt-o
About five years ago I promised my EZ a landing light for Christmas. Well, I've got some time on my hands now, does anyone have suggestions? -I would prefer to minimize any composite work, so a bolt-o
|
By
Ian Huss
·
|
|
O-235 C2C for sale
After years of not building and just lurking on this list, I'm finally getting back into my Long EZ project. In the interim, I have picked up an O-320, so my ready-to-assemble O-235 C2C is for sale. A
After years of not building and just lurking on this list, I'm finally getting back into my Long EZ project. In the interim, I have picked up an O-320, so my ready-to-assemble O-235 C2C is for sale. A
|
By
Larry Pilkington
·
|
|
: Ipad mini panel mount RAM Mount Part Nos.
Hi Ion, All, After I replied to you I looked up the RAM Mount site - very confusing if visiting for the first time!" I therefore thought to copy the group with this. I looked up the RAM Mount part num
Hi Ion, All, After I replied to you I looked up the RAM Mount site - very confusing if visiting for the first time!" I therefore thought to copy the group with this. I looked up the RAM Mount part num
|
By
Mike Tooze
·
|
|
Ipad mini panel mount 16 messages
Has anyone used the panel mount for the Ipad mini in their instrument panel? Which one is the best choice taking into account securing (turbulence) cable management and cooling? Space considerations.
Has anyone used the panel mount for the Ipad mini in their instrument panel? Which one is the best choice taking into account securing (turbulence) cable management and cooling? Space considerations.
|
By
josrph berki
·
|
|
Epoxy on sale 4 messages
I happen to be on the West Marine email advertising list. Just got advert today about 25% off sale thru May 4th for composite supplies, including pretty much all of the West System (no relation to Wes
I happen to be on the West Marine email advertising list. Just got advert today about 25% off sale thru May 4th for composite supplies, including pretty much all of the West System (no relation to Wes
|
By
KEN4ZZ
·
|
|
Long EZ wheel pants
I have the pants pictured below for sale. $400 and I pay freight anywhere in the 48 contiguous sates. You can reach me at 305 992 5340 with any questions. Richard.Richmond@...
I have the pants pictured below for sale. $400 and I pay freight anywhere in the 48 contiguous sates. You can reach me at 305 992 5340 with any questions. Richard.Richmond@...
|
By
rcr7373
·
|
|
0320 10:1 running Rough 3 messages
If the engine is running ROUGH it is not usually a vacuum leak at the carb seal. A vacuum leak tends add RPM to the engine and a slight leaning of fuel unless it is at one of the intake tube swedged t
If the engine is running ROUGH it is not usually a vacuum leak at the carb seal. A vacuum leak tends add RPM to the engine and a slight leaning of fuel unless it is at one of the intake tube swedged t
|
By
Phillip Camarda
·
|
|
Uavionix tailbeacon in VariEze - ECHO 4 messages
I don't mean to hijack the topic, but antennas don't have to be placed outside of the aircraft. My ECHO (both IN & OUT) installation is internal and out of the way. The "hockey puck" GPS antenna is Ve
I don't mean to hijack the topic, but antennas don't have to be placed outside of the aircraft. My ECHO (both IN & OUT) installation is internal and out of the way. The "hockey puck" GPS antenna is Ve
|
By
Terry Schubert
·
|
|
Uavionix tailbeacon in VariEze 15 messages
I recall someone said they had successfully installed a Uavionix tailbeacon in the nose of a VariEze but I can't find the post. If you have experience with installing this adsb solution in your canard
I recall someone said they had successfully installed a Uavionix tailbeacon in the nose of a VariEze but I can't find the post. If you have experience with installing this adsb solution in your canard
|
By
Steve
·
|
|
Cleveland Wheels & Brakes for sale
If anyone here needs wheels/brakes for a Long-Eze. I have an unused Cleveland wheel and brake kit for sale. the wheels only were used for a short time in my garage to roll project around, never outsid
If anyone here needs wheels/brakes for a Long-Eze. I have an unused Cleveland wheel and brake kit for sale. the wheels only were used for a short time in my garage to roll project around, never outsid
|
By
h2w@...
·
|
|
Trio autopilot 7 messages
Query: Does anyone know if you can couple an IPAD mini with GPS app to serve the Trio autopilot? -- James W. Evans Jr. Airport Manager Tappahannock - Essex County Airport 1450 Aviation Rd. Tappahannoc
Query: Does anyone know if you can couple an IPAD mini with GPS app to serve the Trio autopilot? -- James W. Evans Jr. Airport Manager Tappahannock - Essex County Airport 1450 Aviation Rd. Tappahannoc
|
By
Jim Evans
·
|
|
Engine Mount Needed 5 messages
I have a friend in need of an original style conical Lycoming engine mount for a Long EZ. Can anyone help? There is one on Barnstormers but he is having trouble contacting the guy so far. New or used
I have a friend in need of an original style conical Lycoming engine mount for a Long EZ. Can anyone help? There is one on Barnstormers but he is having trouble contacting the guy so far. New or used
|
By
Sam Chambers
·
|
|
iFly 720 for sale 2 messages
Posting for a friend. His email is attached, here. ---------------------------------------------------------------- I just removed my iFly 720 GPS from the aircraft. It was mounted in panel and used a
Posting for a friend. His email is attached, here. ---------------------------------------------------------------- I just removed my iFly 720 GPS from the aircraft. It was mounted in panel and used a
|
By
Thomas W. Carey
·
|
|
Cowling Mods for 160HP Engine 10 messages
I recently factory overhauled my O320E2G Long EZ and upgraded from 150-160HP. I've done a couple fo flight and I've noticed higher engine temperatures (in the 420+ degF) than my previous configuration
I recently factory overhauled my O320E2G Long EZ and upgraded from 150-160HP. I've done a couple fo flight and I've noticed higher engine temperatures (in the 420+ degF) than my previous configuration
|
By
Afif Saybe
·
|
|
Cowling Mods for 160HP Engin 17 messages
Make sure you have the correct carburetor. For our application with free flowing exhaust you need to use the following carb. MA-4SPA Model # 10-3678-32 Lycoming part # 72394 This carb unusual set up t
Make sure you have the correct carburetor. For our application with free flowing exhaust you need to use the following carb. MA-4SPA Model # 10-3678-32 Lycoming part # 72394 This carb unusual set up t
|
By
Gary Hunter
·
|
|
Lightspeed 20XL One Left!
Hi Canard Aviators, Yesterday I thought I had sold them all but this morning received an email saying that one person has backed out (not a Canard person). So that leaves me with one more to let go. A
Hi Canard Aviators, Yesterday I thought I had sold them all but this morning received an email saying that one person has backed out (not a Canard person). So that leaves me with one more to let go. A
|
By
flyingtiger05
·
|